CW6060AC Stepping motor driver, current 2A-6A, AC voltage input 24Vac~55Vac

CW6060AC Stepper motor driver current range: 2A-6A voltage range:24Vac~55Vac

Characteristics:1. Power input type:24V~55V AC2. Output current:2~6A3. Mircostepping:1(1.8º),1/2,1/4,1/8,1/16,1/32,1/64,1/128,1/256                         1/5,1/10,1/25,1/50,1/125,1/2504. Protect form : Overheated  protect, lock automatic half current ,error connect protect 5. Dimensions:147mm*97mm*30mm6. Weight:<600g.                                          7. Working environment:Temperature-15~40°C Humidity<90%.

I/O Ports:1.AC,AC:AC power positive pole 24V~55V ACNote:Must guard against exceeding 55V AC, so as not to damage the module2.GND:DC power cathode3.A+,A-:Stepping motor one winding 4.B+,B-:Stepping motor other winding5.CP +,CP -:Stepping pulse input+5V (Rising edge effective ,                    rising edge duration >10μS)6.CW +,CW-:Stepping motor direction input, voltage level touched off,high towards, low reverse7.REST+,REST-: motor free              

NOTE:1.When ambient temperature is high or working current over 3A,  fix the module on big metal shell , or use axle flows fan dispels the heat, to make the module run reliably for a long time.  2.Half current automatically: if control machine not send out signal  in half second, driver enter half current state of automatically for electricity saving, the phase current of the winding of the electric.3. The fault phase is protected : When the double-phase electrical machinery is connected with driver , users are apt to connect the phase by mistake, thus would damage the driver seriously. The protecting circuit is within this driver, when users connect by mistake, the driver will not be damaged, but the electrical machinery runs abnormally, shake , and output is small.Please check whether the wiring of electrical machinery is a mistake .

CW6060AC Stepping motor driver, current 2A-6A, AC voltage input 24Vac~55Vac